Sundance.com ProductsThese are the products that were on the old Sundance site.
Cable - Series- Com-series
 Sundance uses two types of Com port cables. The SMT500 series (internal also know as FMS) and the external buffered Com Port cable (SMT502
more...
Software - Development- Diamond DSP
 Diamond DSPAs an official software partner, 3L Ltd has been working closely with Sundance for nearly 20 years, and this close relationship has mean
more...
- Diamond FPGA
- Diamond FPGAAs an official software partner, 3L Ltd has been working closely with Sundance for nearly 20 years, and this close relationship has mea
more...
System - Embedded- DVIP
 Features at a Glance:
3x Virtex-4 FX-60s (XC4VFX60)
2x
more...
Engineering Kit- EVP6472
 The EVP6472 is available NOW.For a limited time only the EVP6472 complete 'C6472 Evaluation platform is available to buy for the VERY special price of $2000.
The platform comprises of the following:
more...
FPGA IP Core- FC-JPEG04
 Sundance's FPGA implementation for a JPEG compression algorithm, the FC-JPEG04, is based on the ISO/IEC 10918-1 standard. This intellectual property core (IP core) development uses the Xilinx Virtex-II FPGA as the re
more...
- FC003-D
 The LDS-SATA_DUAL_HOST_XV5 IP incorporates the Transport layer, the Link layer and the PHY layer on a
Xilinx Virtex 5 FPGA.
The LDS-SATA_DUAL_HOST_XV5 IP is compliant with Serial ATA II specification and
signali
more...
- FC003-S
 The LDS-SATA_HOST_XV5 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Virtex
5 FPGA.
The LDS-SATA_HOST_XV5 IP is compliant with Serial ATA II specification and signaling rate is 1.5
more...
- FC100
 Sundance's new off-the-shelf IEEE-754 FFT / IFFT Floating Point core is the most efficient available in the FPGA world. Designed for high performance programmable devices from Xilinx, this FFT core performs long transfor
more...
- FC104
 A Digital Down Converter performs channel access functions in digital receivers. It is used for extracting a channel (frequency band) of interest in a wideband signal. Sundance's wideband DDC core employs a quad DDC arch
more...
- FC107M
- This firmware module provides a flexible master-mode Serial Peripheral Interface (SPI)
module for any FPGA. The SPI protocol shifts a single in/out data bit serially to build up a
data word of predefined width before t
more...
- FC107S
 This firmware module provides a flexible slave-mode Serial Peripheral Interface (SPI) module
for any FPGA. The SPI protocol shifts a single in/out data bit serially to build up a data word
of predefined width before tr
more...
- FC108
 The polyphase filterbank algorithm is a very efficient way to implement a uniformly distributed multi-channel filterbank using a fast fourier transform (FFT). The functional diagram below shows a polyphase filterbank wit
more...
- FC118
The FC118 FPGA IP core provides a high-resolution complex Fast Fourier Transform (FFT) function in a resource-efficient high-speed streaming implementation. This highly-customizable core is ideally suited for channelli
more...
- FC120
 The FC120 sFPDP IP core provides a highly flexible interface to support communication with external devices or other FPGAs using the ANSI/VITA 17.1 Serial Front-Panel Data Port protocol.
sFPDP enables high-speed, l
more...
- FC200
 Sundance's new fixed point FFT core combines performance and flexibility to offer an off-the-shelf product, which can be easily integrated into many applications. This product can be offered in both source and compile
more...
- FC201
 General Description.
The FC201 is an efficient implementation of a general offset/gain/delay
correction. In order for it to be used within a Diamond/FPGA system, the
I/O interfaces are standardized to the
more...
- FC202
 FC202 is an efficient implementation of a quadrature conversion algorithm as a 3L Diamond FPGA task. In order for it to be used within a Diamond/FPGA system, the I/O
more...
- FC903
 WiMAX PHY Lab is a comprehensive implementation of the mobile WiMAX physical layer.
WiMAX PHY Lab can be used at all stages of the WiMAX software, hardware and IPR
development, from research, prototyping and i
more...
- FC911
 LTE PHY Lab is a comprehensive implementation of the 3GPP Release 8 E-UTRA physical layer.
LTE PHY Lab can be used at all stages of the LTE software, hardware and IPR development,
from research, prototyping an
more...
Cable - Series- JTAG-series
- Sundance uses two main types of JTAG connection. The internal XDS510 compatible cable (SMT503) and the Sundance Buffered JTAG connector (S
more...
System- MIMO-DS
 The Sundance MIMO development station (MIMO-DS) is a modular system made of multiple FPGAs and DSPs that can be used to prototype and t
more...
System - Embedded- MIMO_LTE
 The MIMO_LTE platform supports the design and development of a wide range of MIMO applications.
The MIMO_LTE can be used for SDR research, MIMO development, Multichannel radio transceivers, Military & public safe
more...
Cable - Series- MMBX Series
- Sundance uses the interconnecting MMBX connectors and matching RG316 50 Ohm cables (cable from
more...
Software- PARS
 PARS is a new and emerging technology for generating parallel applications that
target hardware systems comprising multiple DSP and FPGAs from a single
Simulink® model. There are many software in the marke
more...
System - Embedded- RASS
 Sundance continues to scale new heights with its breakthrough RASS - Reconfigurable, Accelerating, Scalable SuperComputing solution.
To meet industry demand for energy efficient, extreme
more...
Cable - Series- RSL-Series
- RSL Connection optionThere are a number of RSL interconnect options available. They include:
Cables / Flexi PCB interconnections
more...
- SDB-series
 The SMT510 series are Sundance Digital Bus cables which are used for high speed inter module communication. The cables and connectors are manufactured by ODU in Germany.
more...
System- SDR-DS
 Sundance's Software Defined Radio Development System (SDR-DS) is based on the latest Texas Instruments DSPs and cutting edge Xilinx FPGAs.
The SDR-DS solution provides:
more...
Cable - Series- SHB <> SDB series
 There are two options for SHB to SDB connections. they are the SMT517 and SMT518.
One is left
more...
- SHB-series
 The above photo is of the SMT511-120. Please click a link below for details of other connectors and cables.
The Sundance High-speed Bus (SHB) is the second generation o
more...
SLB extender- SLBe
 This product has been remaned the SMTe.
Please click here to be take to the product page.
more...
Carrier - PCI-104 Express SLB carrier- SMT100-FX30
 The SMT100 is an SLB carrier board in the PCI/104-Express format.
The main features of the SMT100 are listed below:
SLB Carrier.
more...
- SMT100-FX70
- The SMT100 is an SLB carrier board in the PCI/104-Express format.
The main features of the SMT100 are listed below:
SLB Carrier.
more...
- SMT105
 The SMT105 is a SLB carrier based on the industrial PCIe104 format (PCIe/104).
It has a large Virtex 5 FPGA for processing tasks.
SLB Carrier.
Virtex5 FPGA (including integrated PowerPCâ„¢ core).
more...
Carrier -Embedded Module- SMT111
 The SMT111 is a carrier board capable of accepting a single TIM and SLB mezzanine module. A single 12Vdc power input is required, and on-board converters produce the necessary TIM supplies.
more...
- SMT118
 The increasing need for portable and embedded DSP solutions has convinced Sundance of the need for a truly 12V-Input solution with stand-alone capability. The SMT118 has been developed to carry 3 Modules and attention to
more...
- SMT118-LT
 The increasing need for portable and embedded DSP solutions has convinced Sundance of the need for a truly 12V-Input solution with stand-alone capability. The SMT118-LT has been developed to carry 3 Modules and attention
more...
PCI Fibre Interface- SMT123
 The SMT123 is designed as a multi-purpose two-way Fibre-Channel interface. It is a stand-alone board with a Sundance High-Speed Bus interface, that provides two separate 16-bit data channels, one each way, through the Fi
more...
Module Carrier, Stand-alone- SMT128
 The need for 100% fault-tolerant DSP systems has been a dream of Sundance for a long time. The development of the SMT128 provides a platform for 3-way redundancy. If two out of three SMT128s in a turn-key system become
more...
Carrier - PCI-104 Module- SMT130
 The SMT130 is a single site module carrier developed to provide access to a TIM module over the PCI-104 PCI
more...
- SMT130-I
 The SMT130-I is a single site module carrier developed to provide access to a TIM module over the PCI-104 PC
more...
Carrier -Embedded Module- SMT144
 The SMT144 is a reduced feature version of the SMT148-FX. The SMT144 is powered from a standard PC power supply, eliminating the need for complex power / cable solutions. Dia
more...
Carrier - PCI Module (64 Bit)- SMT145-VP7
 The SMT145 is a single site TIM compatible carrier card, which uses a 64 bit PCI bus. The SMT145 has a Virtex-II Pro
more...
- SMT145-VP7-FC
- The SMT145 is a single site TIM compatible carrier card, which uses a 64 bit PCI bus. The SMT145 has a Virtex-II Pro
more...
Carrier -Embedded Module- SMT148-FX-ATX
There are two versions of the SMT148-FX available. The DC version, and the ATX version.The
more...
- SMT148-FX-DC
-
There are two versions of the SMT148-FX available. The DC version, and the ATX version.The
more...
- SMT148-LT
 The SMT148-LT is a stand alone 4 site TIM carrier. It is a feature reduced version of the SMT148-VP7. It still has 32 LEDS conne
more...
Embedded Module Carrier- SMT148-VP20
 The SMT148 is a stand alone 4 site TIM carrier. It has analogue inputs and outputs (8 of each, with a sampling frequency for up to 400KHz), three UART connections (one RS485 and two RS232), 56 pairs of LVDS connections,
more...
Carrier -Embedded Module- SMT148-VP7
- The SMT148 is a stand alone 4 site TIM carrier. It has analogue inputs and outputs (8 of each, with a sampling frequency for up to 400KHz), three UART connections
more...
FPGA- SMT166
 The SMT166 is an SLB Platform designed around two Xilinx LXT Virtex-6 FPGAs. It
can receive up to 4 SLB mezzanine modules and one TIM or SLB base module. The
SMT166 shows a symmetrical architecture in order to suit nee
more...
Carrier -Embedded Module- SMT180
 The SMT180 is an extension of the path created by SMT118. The SMT180 has taken the step of Stand-alone operation to another level as two SMT180s can be cascaded and provide a platform for no less than 16 Modules. If each
more...
Solution - PC-104- SMT238-VP7
 The SMT238-VP7 is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and a SMT338-VP7 (A FPGA Module; SHB/RSL/SLB Interfaces; Xilinx Virtex II Pro VP7 TIM)
The
more...
Solution - PCI-104- SMT239
 The SMT239 is made up of the SMT130 (A PCI104 single site TIM carrier) and a
SMT339 (TMS320DM642 @ 720 MHz; Xilinx Virtex 4 XC4VFX60 FPGA). This combination
gives high performance multimedia processing in a compact f
more...
Solution - PC-104- SMT251
- The SMT251 is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and a SMT351-G (A Memory Module; Virtex-II Pro FPGA XC2VP7 TIM)
The
more...
Carrier and TIM- SMT251-G
- The SMT251-G is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and a SMT351-G (A Memory Module; Virtex-II Pro FPGA XC2VP7; Rocket Serial Link TIM)
The
more...
Solution - PC-104- SMT261Q
 The SMT261Q is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and a SMT361Q (A 4x C6416 @ 600MHz, 1x Virtex II XC2V2000, 2x SHB Interface, 4 ComPorts and Global Bus TIM)
more...
Solution - PCI-104- SMT261Q-I
- The SMT261Q-I is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and a SMT361Q (A 4x C6416 @ 600MHz, 1x Virtex II XC2V2000, 2x SHB Interface, 4 ComPorts and Global Bus TIM). This
more...
- SMT262
 The SMT262 is made up of the SMT130 (A PCI104 single site TIM carrier) and a SMT362 (Digital Video Infrastructure Processor TIM, 2x C6455 @ 1GHz, 256Mb DDR2-500 SDRAM / DSP, 1x Virtex-4 FX60, 2x SHB, 2x RSL Interface, 4
more...
- SMT281A
- The SMT262 is made up of the SMT130 (A PCI104 single site TIM carrier) and a SMT362 (Digital Video Infrastructure Processor TIM, 2x C6455 @ 1GHz, 256Mb DDR2-500 SDRAM / DSP, 1x Virtex-4 FX60, 2x SHB, 2x RSL Interface, 4
more...
Solution - PC-104- SMT287
 The SMT287 is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and an SMT387 (Disk Storage Module; 'C6415 DSP; Virtex II VP20; SATA Link; Rocket Serial Link)
The
more...
- SMT290-VP30-6
 The SMT290-VP30-6 is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and a SMT390-VP30-6 (An ADC Module, 2-Channels 210MSPS @ 12bits; SHB/RSL Interfaces; Xilinx Virtex II Pro VP30 FPGA)
more...
- SMT291
 The SMT291 is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and an SMT391 (ADC Module; Dual Channel 1GHz, 8-bit ADC; Sundance High-speed Bus; Xilinx Virtex II VP30-6 FPGA; (RSL) Rocket Serial Li
more...
Solution - PCI-104- SMT291A
 The SMT291 is made up of the SMT130 (A PCI104 single site TIM carrier) and a SMT391 (ADC Module; Dual Channel 1GHz, 8-bit ADC; Virtex-4; SX35; ZBT-SRAM ; SLB Interface; SHB Interface). This combination gives high perfo
more...
- SMT295
- The SMT295 is made up of the SMT130 (a PCI-104 single site TIM specification carrier) and a 1GHZ SMT395 (A single width TIM with a Virtex II pro FPGA and a 1GHz 64-bit DSP)
The
more...
- SMT298-VP70
- The SMT298-VP70 is made up of the SMT130 (A PCI104 single site TIM carrier) and a SMT398-VP70 (FPGA Module, Virtex XC2VP70-6; QDRII SRAM ; Rocket I/Os ). This combination gives high performance processing in a compact
more...
Carrier - cPCI Module- SMT300
 The SMT300 is a single site module carrier developed to provide access to a TIM Module over the CompactPCI bus running at 33MHz with a 32-bit data bus. The card has an "on
more...
- SMT300-NI
 This product incorporates a double-width replacement front panel for the SMT300. The extra space to the right of the standard SMT300 connectors contains a 68-pin Tyco d-style connector that can receive a National Instrum
more...
- SMT300Q
 The SMT300Q is a quad site module carrier developed to provide access to a TIM Modules over the CompactPCI bus running at 33MHz with a 32-bit data bus. The card has an
more...
Carrier - PCI Module- SMT310
 The SMT310 is a single site module carrier developed to provide access to a TIM Module over the PCI bus running at 33MHz with a 32-bit data bus. The card has an "on-board"
more...
- SMT310Q
 The SMT310Q is a quad (4) site module carrier developed to provide access to a TIM Modules over the PCI bus running at 33MHz with a 32-bit data bus. The card has an "on-bo
more...
Module - ADC- SMT317
 SMT317 offers a building block for scalable Analogue to Digital data collections starting from 8 channels and reaching as many as 256 channels by cascading eight SMT317s together. The single width Module has eight
more...
FPGA Module- SMT318
 The SMT318 is a low cost FPGA module with 2 Spartan II-E devices (XC2S300E-6). It provides a flexible platform for systems
more...
Module - FPGA- SMT318-SX55
- The SMT318-SX55 is an FPGA module with two Virtex 4 (XC4VSX) devices in a XC4VSX55-FF1148 package. It provides a flexible platform for s
more...
Module - Graphics- SMT319
 The SMT319 is Sundance's 3rd generation of Texas Instruments 'C6x DSP Module built on TIM format and uses the TMS320C6416 DSP. This processor has
more...
Module Carrier- SMT320
 NOT FOR NEW DESIGNSReplaced by SMT310Q.
more...
Module - I/O- SMT321H
 The SMT321 is a single width TIM module. It is capable of generating two separate LVPECL triggers, two separate analogue test signals with the frequency depending on the VCOs on the board, and two
more...
- SMT321L
- The SMT321 is a single width TIM module. It is capable of generating two separate LVPECL triggers, two separate analogue test signals with the frequency depending on the VCOs on the board, and two
more...
Module Carrier- SMT327
 NOT FOR NEW DESIGNS Replaced by SMT300Q No stock, use SMT300Q
more...
- SMT328
 The SMT328 is a 4 site VME tim carrier. It enables connection of comports of sites together both via cables, and internal switches.
The external comports are all fully buffered, ensuring that there is minimum signal de
more...
Carrier - VME Module- SMT329-VME64
 The SMT329 is a VME four-site module carrier developed to provide access to TIM Modules over the VME64 (parallel) bus. It is backward compatible with the
more...
Carrier - VXS Module- SMT329-VXS
- The SMT329 is a VME four-site module carrier developed to provide access to TIM Modules over the VME64 (parallel) and VXS (serial) busses. It is backward compatible with the
more...
DSP Module- SMT335
 The SMT335 TIM consists of a Texas Instruments TMS320C6201 running at 200MHz. Modules are populated with 512KB of synchronous burst SRAM (SBSRAM) and 16MB of synchronous DRAM (SDRAM), giving a total memory capacity of 16
more...
- SMT335E-1000
 The specification for the cooling fan used on some versions of our Modules can be found here. The manufact
more...
- SMT335E-2000
- The specification for the cooling fan used on some versions of our Modules can be found here. The manufact
more...
I/O Module- SMT338-422
 Differential signalling is the mechanism of choice when long-distance connections from a PC to the outside world or/and high bandwidth requirements need to be satisfied.
The SMT338 provides the user with differenti
more...
- SMT338-644
- Differential signalling is the mechanism of choice when long-distance connections from a PC to the outside world or/and high bandwidth requirements need to be satisfied.
The SMT338 provides the user with differenti
more...
- SMT338-VP20-5
 SMT338-VP provide a 'Base' Module for a range of applications and functions. The addition of a Virtex-II Pro
more...
- SMT338-VP20-6
- SMT338-VP provide a 'Base' Module for a range of applications and functions. The addition of a Virtex-II Pro
more...
Module - FPGA- SMT338-VP30-6
- SMT338-VP provide a 'Base' Module for a range of applications and functions. The addition of a Vir
more...
I/O Module- SMT338-VP7-5
 SMT338-VP provide a 'Base' Module for a range of applications and functions. The addition of a Virtex-II Pro
more...
Module - Graphics- SMT339
 The SMT339 is a dedicated second generation high speed image processing module
for use in a wide range of image analysis systems.
The module can be plugged into a standard TIM single width slot and can be
access
more...
Module - ADC- SMT340A
 SMT340A offers a integrated solution for medium-speed Dual channel Analogue to Digital data collection and is an upgraded version of SMT340. The single width Module has two AD6644s from Analog Devices Inc. which are 14-b
more...
Module - FPGA- SMT348-LX160
 The SMT348 provides a 'Base' module for a range of applications and functions. The Virtex4 LX has the highest amount
more...
- SMT348-SX55
- The SMT348 provides a 'Base' module for a range of applications and functions. The Virtex4 SX has the highest amount
more...
Module - Radio (IF/RF)- SMT349
 The SMT349 is an IF/RF front-end module that completes the transmission and reception paths of Sundance Digital Radio systems. The design is compatible with the other Sundance modules such as the
more...
SLB Module - DAQ- SMT350
 The SMT350 is a single width expansion TIM that plugs onto the SLB base module SMT368 (Virtex4 FPGA) and
more...
Module - FPGA / Memory- SMT351-G
 The SMT351 is a single width TIM compatible module populated with hi-density BGA package memory devices that is able to store up to 1GB of data at 400MB/s. The SMT351 can be casca
more...
Memory Module- SMT351-M
- The SMT351 is a single width TIM compatible module populated with hi-density BGA package memory devices that is able to store up to 512MB of data at 400MB/
more...
Module - FPGA- SMT351T-LX110-1
 The SMT351T provides a 'Base' module for a range of applications and functions. The Virtex 5 LXT has the highest amount of Logic blocks in the Virtex 5 range, and the FPGA also has direct access
more...
- SMT351T-LX50-1
- The SMT351T provides a 'Base' module for a range of applications and functions. The Virtex 5 LXT has the highest amount of Logic blocks in the Virtex 5 range, and the FPGA also has direct access
more...
- SMT351T-SX50-1
- The SMT351T-SX provides a 'Base' module for a range of applications and functions. The Virtex 5 SXT has the highest amount of DSP blocks in the Virtex 5 range, and the FPGA also has direct access
more...
- SMT351T-SX95-1
- The SMT351T-SX provides a 'Base' module for a range of applications and functions. The Virtex 5 SXT has the highest amount of DSP blocks in the Virtex 5 range, and the FPGA also has direct access
more...
Module - DSP- SMT355-1500
- For more information on this or any Sundance product, please use this form to contact Sundance
more...
- SMT355-4000
- For more information on this or any Sundance product,please use this form to contact Sundance
more...
Module - ADC- SMT356
 The SMT356 (356) module is a single width TIM device.
It incorporates a Xilinx XCV300 Virtex FPGA.
Eight 14-bit ADCs interface to the Virtex device, together with six 'C40 style comports.
more...
DAC Module- SMT357
 Single width module 12 months warranty IN CONCEPTUAL DESIGN.
more...
FPGA Module- SMT358-1000-4M
 The specification for the cooling fan used on some versions of our Modules can be found here. The manufact
more...
- SMT358-1000-8M
- The specification for the cooling fan used on some versions of our Modules can be found here. The manufact
more...
- SMT358-1000E-16M
- The specification for the cooling fan used on some versions of our Modules can be found here. The manufact
more...
- SMT358-1000E-4M
- The specification for the cooling fan used on some versions of our Modules can be found here. The manufact
more...
- SMT358-1000E-8M
- The specification for the cooling fan used on some versions of our Modules can be found here. The manufact
more...
ADC Module- SMT360A
 SMT360A offers a integrated solution for medium-speed Dual channel Analogue to Digital data collection and is an upgraded version of SMT360. The single width Module has two
more...
DSP Module- SMT361
 SMT361 is based on the 64-bit TMS320C6416 DSP family and offers the highest fixed-point processing power ever. Sundance did not stop h
more...
Module - DSP- SMT361A
- SMT361A is based on the 64-bit TMS320C6416 DSP family and offers the highest fixed-point processing power ever. Sundance did not stop
more...
- SMT361Q
 SMT361Q is based on no less than four 64-bit TMS320C6416 DSP family and offers the highest f
more...
- SMT361Q-I
 SMT361Q-I is based on no less than four 64-bit TMS32C6416EGLZA6E3 DSP family and offer
more...
- SMT362
 With an operating frequency of 1GHz and 2MB on-chip level 2 cache each, the TMS320C6455 DSPs have the highest fixed-point processing power in the
more...
Module - Ethernet / DSP- SMT363-XC2
 The SMT363-XC2 is a "Stand-alone" Module that combines a TMS320C6713 DSP, a Xilinx FPGA and a N
more...
Ethernet Module- SMT363S
 The SMT363S is a 'Stand-alone' Module that combines a TMS320C6711 DSP, a Xilinx FPGA and a
more...
- SMT363V
- The SMT363V is a 'Stand-alone' Module that combines a TMS320C6711 DSP, a Xilinx FPGA and a
more...
Module - ADC- SMT364
 SMT364 offers a building block for scalable high-speed Analogue to Digital data collections starting from 4 channels and reaching as many as 32 channels by cascading eight SMT364s. The single width Module has four
more...
DSP Module- SMT365-16-1
 SMT365 is based on the 600MHz 64-bit TMS320C6416 Revision1.1 DSP and offers the highest fixed-point processing power ever. Sundance did not stop
more...
- SMT365-16-2
- SMT365 is based on the 600MHz 64-bit TMS320C6416 Revision1.1 DSP and offers the highest fixed-point processing power ever. Sundance did not stop
more...
- SMT365-4-1
- SMT365 is based on the 600MHz 64-bit TMS320C6416 Revision1.1 DSP and offers the highest fixed-point processing power ever. Sundance did not stop
more...
- SMT365-4-2
- SMT365 is based on the 600MHz 64-bit TMS320C6416 Revision1.1 DSP and offers the highest fixed-point processing power ever. Sundance did not stop
more...
- SMT365-8-1
- SMT365 is based on the 600MHz 64-bit TMS320C6416 Revision1.1 DSP and offers the highest fixed-point processing power ever. Sundance did not stop
more...
Module - DSP- SMT365-8-2
- SMT365 is based on the 600MHz 64-bit TMS320C6416 Revision1.1 DSP and offers the highest fixed-point processing power ever. Sundance did not stop
more...
- SMT365E
 The SMT365E is based on the 600MHz 64-bit TMS320C6416 revsion1.1 DSP family and offers the highest fixed-point processing
more...
ADC Module- SMT367
 The SMT367 is a differential 12 Channel, 12 bit ADC TIM module based on a Analog
Devices AD7892 ADC converter. It is capable of digitising a data input strea
more...
Module - FPGA- SMT368
 The SMT368 provides a 'Base' module for a range of applications and functions. The Virtex4 SX has the highest amount of DSP blocks in th
more...
- SMT368A
- The SMT368A provides a 'Base' module for a range of applications and functions. The Virtex4 SX has the highest amount of DSP blocks in t
more...
Module - DAQ- SMT370-AC
 SMT370 offers a integrated solution for high-speed Dual channel Analogue to Digital data collection and Digital to Analogue data generation. The single width Module has two
more...
- SMT370-AC-I
 SMT370-AC-I offers a integrated solution for high-speed Dual channel Analogue to Digital data collection and Digital to Analogue data generation. The single width Module has tw
more...
- SMT370-DC
 SMT370 offers a integrated solution for high-speed Dual channel Analogue to Digital data collection and Digital to Analogue data generation. The single width Module has two
more...
- SMT370-DC-I
 SMT370-DC-I offers a integrated solution for high-speed Dual channel Analogue to Digital data collection and Digital to Analogue data generation. The single width Module has tw
more...
- SMT370-Series
 SMT370 offers a integrated solution for high-speed Dual channel Analogue to Digital data collection and Digital to Analogue data generation. The single width Module has two
more...
Module - DSP- SMT372T-FX30
 The SMT372T is the first of the Sundance range to use the TMS320C6472. Not only once, but twice.
The SMT372T utilises tw
more...
- SMT372T-FX70
- The SMT372T is the first of the Sundance range to use the TMS320C6472. Not only once, but twice.
The SMT372T utilises tw
more...
Cable- SMT372TEth
 Ethernet connector to fit on enable network connections to your SMT372T.
The ether net connector used is a Halo HFJ11-1G01E
HFJ11-1G02E (preferred part)
For the PCB layout, please
more...
I/O Module- SMT373
 The SMT373 converts Sundance Digital Bus SDB LVTTL signals to Low-Voltage Differential Signals (LVDS) and can connect two systems several meters apart.
The board operates a conversion between LVTTL (TTL tolerant) s
more...
LVDS Mezzanine Card- SMT373Q
 Please contact Sundance for more details on this productMail Sales@sundance.com.
more...
Module - DSP- SMT374-300
 How do you satisfy the ever growing demand for higher performance... Well the answer is to make smaller Modules with faster DSPs and more memory.The SMT374 is a masterpiece of integration as it has TWO 'C6713 Floatin
more...
DSP Module- SMT375E-1000
 The specification for the cooling fan used on some versions of our Modules can be found here. Th
more...
- SMT375E-2000
- The specification for the cooling fan used on some versions of our Modules can be found here. Th
more...
- SMT376-6711-128
 Sundance has traditionally built Parallel Processing systems for applications like Body Scanners and Rendering systems, but lack of cost-effective floating-point devices has pushed the Floating Point functions onto the H
more...
Module - DSP- SMT376-6711-256
- Sundance has traditionally built Parallel Processing systems for applications like Body Scanners and Rendering systems, but lack of cost-effective floating-point devices has pushed the Floating Point functions onto the H
more...
Module - DAC- SMT377
 The module consists of two DAC7634-quad digital to analogue converters (DAC). They are serially connected to a Xilinx
more...
DAC Module- SMT378A
 SMT378A offers a integrated solution for medium-speed Dual channel Digital to Analogue data generation. The single width Module has an AD9773 dual channel TxD
more...
ADC Module- SMT380
 NOT FOR NEW DESIGNSSMT380 offers a total Analogue to Digital data conversation front-end for 2 channels of 105MSPS sampling on a single width Module. The use of Analog Device Inc. AD9138
more...
- SMT380A
 SMT380A offers a integrated solution for medium-speed Dual channel Analogue to Digital data collection and is an upgraded version of SMT380. The single width Module has two
more...
SLB Module - DAC- SMT381
 The SMT381 is a single width Daughter Module that plugs onto the SMT338-VP30-6 or SMT398-VP50-6 and this functions as a 'Bas
more...
Module - I/O- SMT382
 The SMT382 is a 12 Channel differential RS422 Transceiver, capable of 10Mbaud transfer rates with ESD protection on the RS422 I/O's and high source/sink current capabilities. It is supplied on a single width TIM module a
more...
SLB Module - ADC- SMT384
 The SMT384 is a single width expansion TIM that plugs onto an SLB base module SMT368 (Virtex-4 FPGA) and
more...
- SMT386
 The SMT386 is a single width expansion module onto a SLB base module such as SMT338-VP (Virtex-II/Pro
more...
Module - DSP- SMT387-VP20-6
 The SMT387 is the latest of a long tradition of Sundance to provide Modular solutions and the SMT387 roots lie with the SMT307, that later was updated to the SMT337 and the common feature is the integration of a DSP, Mem
more...
DAC Module- SMT388A
 SMT388A offers a integrated solution for medium-speed Dual channel Digital to Analogue data generation. The single width Module has an
more...
SLB Module - ADC- SMT390
 SMT390 is the first of a range DAQ Modules from Sundance that uses Virtex-II Pro FPGA and a unique "Do
more...
ADC Module- SMT390-VP20-5
- SMT390 is the first of a range DAQ Modules from Sundance that uses Virtex-II Pro FPGA and a unique 'Double-Decker' inter-conn
more...
- SMT390-VP30-5
- SMT390 is the first of a range DAQ Modules from Sundance that uses Virtex-II Pro FPGA and a unique 'Double-Decker' inter-conn
more...
- SMT390-VP30-6
- SMT390 is the first of a range DAQ Modules from Sundance that uses Virtex-II Pro FPGA and a unique 'Double-Decker' inter-conn
more...
- SMT390-VP7-5
- SMT390 is the first of a range DAQ Modules from Sundance that uses Virtex-II Pro FPGA and a unique 'Double-Decker' inter-conn
more...
SLB Module - ADC- SMT391
 The SMT391 is a single width expansion TIM that plugs onto an SLB base module such as SMT338-VP7-5
more...
ADC Module- SMT391-VP
 The SMT391-VP is a single width TIM module. It is capable of sampling two analog inputs at 1 GSPS with a resolution of 8 bits. An Atmel duel channel ADC (
more...
I/O Module- SMT392
 8 digital Inputs 24 digital Outputs QUAD UART based on the OX16C954
more...
- SMT393
 Please contact Sundance for details on this product.E-mail Sales@sundance.com See also SMT123-SHB
more...
DSP Module- SMT395-VP20-6
 SMT395 is based on the 1GHz 64-bit TMS320C6416T DSP, manufactured on t
more...
Module - DSP- SMT395-VP30-6
- SMT395 is based on the 1GHz 64-bit TMS320C6416T DSP, manufactured on t
more...
- SMT395E-VP100-6
 The SMT395E is Sundance's 4th generation of Texas Instruments 'C6x DSP TIM (Texas Instruments Module). This module uses the
more...
- SMT395E-VP70-6
- The SMT395E is Sundance's 4th generation of Texas Instruments 'C6x DSP TIM (Texas Instruments Module). This module uses the
more...
- SMT395Q
 The SMT395Q is Sundance's 4th generation of Texas Instruments 'C6x DSP TIM (Texas Instruments Module). This module uses 4
more...
FPGA Module- SMT398-1000-4-Z2
 The SMT398 is a BIG 'Big-Brother' to the SMT358 FPGA Module that Sundance designed in 1999. It has all the same benefits, and a lot more!The latest versions of the Xilinx Virtex-II are being used to the fullest of th
more...
- SMT398-2000-4-Z2
- SMT398 is a BIG 'Big-Brother' to the SMT358 FPGA Modules that Sundance designed in 1999 and has all the same benefits - and a lot more!The latest versions of the Xilinx Virtex-II are being used to the fullest of their
more...
- SMT398-3000-4-Z4-Q2
- SMT398 is a BIG 'Big-Brother' to the SMT358 FPGA Modules that Sundance designed in 1999 and has all the same benefits - and a lot more!The latest versions of the Xilinx Virtex-II are being used to the fullest of their
more...
Module - FPGA- SMT398-6000-4-Z4-Q2
- SMT398 is a BIG "Big-Brother" to the SMT358 FPGA Modules that Sundance designed in 1999 and has all the same benefits - and a lot more!The latest versions of the Xilinx Virtex-II are being used to the fullest of their
more...
- SMT398-VP70-6
 The SMT398-VP is a TIM module aimed at completing the range of Sundance Virtex II
more...
- SMT398-VP70-7
- The SMT398-VP is a TIM module aimed at completing the range of Sundance Virtex II-Pro FPGA
more...
SLB Module - I/O- SMT399-160
 SMT399-160 is a single width expansion module (SLB mezzanine module). It offers an integrated solution for high-speed sine-wave generation (up to
more...
Module - Clock Generation- SMT399-Fxxx
 The SMT399-Fxx purpose is to enable the synchronization of many ADC and DAC devices in systems which require a common clock source across all devices. The module will consist of a
more...
Carrier- SMT401
 The SMT401 is a TIM carrier in the form of a PCI Mezzanine Card (PMC).
The board is equipped with a high bandwidth PCI interface, allowing it to be hosted directly by any platform with a PCI bus (Revision 2.0 or l
more...
PMC Module- SMT406-4000-4
 The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
- SMT406-4000-5
- The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
- SMT406-4000-6
- The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
- SMT406-6000-4
- The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
- SMT406-6000-5
- The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
- SMT406-6000-6
- The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
- SMT406-8000-4
- The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
- SMT406-8000-5
- The SMT406 is a Processor PMC module aimed at very high performance digital signal processing and data acquisition. It can also be used for ASIC prototyping and intellectual property development.
It delivers the ma
more...
Solution - PrPMC- SMT410
 The SMT410 is a single site module carrier board that provides access to a TIM
module over the PCI Mezzanine Card bus.
An on-board JTAG controller allows systems to be debugged using Code Composer
Studio. This JT
more...
Carrier and TIM- SMT438-VP7
 The SMT438-VP7 is made up of the SMT401 (a PMC single site Carrier) and a SMT338-VP7 (A FPGA Module; SHB/RSL/SLB Interfaces; Xilinx Virtex II Pro VP7 TIM)
The
more...
Solution - PrPMC- SMT451
- The SMT451 is made up of the SMT410 (a PMC single site Carrier) and a SMT351-G (A Memory Module; Virtex-II Pro FPGA XC2VP7; Rocket Serial Link TIM)
The SMT410
more...
Carrier and TIM- SMT451-G
- The SMT451-G is made up of the SMT401 (a PMC single site Carrier) and a SMT351-G (A Memory Module; Virtex-II Pro FPGA XC2VP7; Rocket Serial Link TIM)
The SMT40
more...
Solution - PrPMC- SMT461Q
 The SMT461Q is made up of the SMT410 (a PMC single site Carrier) and a SMT361Q (A 4x C6416 @ 600MHz, 1x Virtex II XC2V2000, 2x SHB Interface, 4 ComPorts and Global Bus TIM)
The
more...
- SMT487
 The SMT487 is made up of the SMT410 (a PMC single site Carrier) and an SMT387 (Disk Storage Module; 'C6415 DSP; Virtex II VP20; SATA Link; Rocket Serial Link)
The SM
more...
Carrier and Tim- SMT490-VP7-5
 The SMT490-VP7-5 is made up of the SMT401 (a PMC single site Carrier) and a SMT390-VP7-5 (An ADC Module, 2-Channels 210MSPS @ 12bits; SHB/RSL Interfaces; Xilinx Virtex II Pro VP7 FPGA)
The
more...
Solution - PrPMC- SMT491
 The SMT491 is made up of the SMT410 (a PMC single site Carrier) and an SMT391 (ADC Module; Dual Channel 1GHz, 8-bit ADC; Sundance High-speed Bus; Xilinx Virtex II VP30-6 FPGA; (RSL) Rocket Serial Link; DDR SDRAM)
more...
- SMT495
- The SMT495 is made up of the SMT410 (a PMC single site Carrier) and a 1GHZ SMT395 (A single width TIM with a Virtex II pro FPGA and a 1GHz 64-bit DSP)
The SMT410
more...
Cable- SMT502-IDC
 Comport cable for use between SMT310 (and SMT310Q) SMT148 or
more...
- SMT504
 This cable is designed to enable an industry standard XDS510 pod to be connected to the buffered JTAG connector found on Sundance Module carrier cards.
more...
- SMT505-CV10
 CV10 to CV10 cable In either 2m or 20cm lengths. The 20cm is show above.
more...
Cable - Series- SMT505-series
 The SMT505-BNC and SMT505-SMA cables are a miniature coax cable connectors (CV10) to a standard
more...
CableCable - Series- SMT506-series
 The SMT506-BNC and SMT506-SMA cables are a miniature coax cable connectors (MMBX) to a standard
more...
Cable- SMT507-BNC
 1 meter long MMCX to BNC cable.
MMCX connectors are designed for frequency ranges from DC up to 6 GHz and for applications where smallest dimensions have to be achieved.
The reliable "snap-on" coupling mech
more...
- SMT507-SMA
- 1 meter long MMCX to SMA cable.Cables show is SMT507-BNC
MMCX connectors are designed for frequency ranges from DC up to 6 GHz and for applicat
more...
- SMT508-XDS
 XD510 to Buffered JTAG converter.This cable comprises of a SMT501 and a converter section. It allows connection between a buffered JTAG connector it an industry standard XDS510 connector. With this cable you can al
more...
- SMT509-PCB
 PCB interconnect used mainly for SMT370. Enables you to connect 2 signals together.
more...
Cable - Series- SMT510-series
- The SMT510 series are Sundance Digital Bus cables which are used for high speed inter module communication. The cables and connectors are manufactured by ODU in Germany.
more...
Cable- SMT511-120
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT511-1200
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT511-320
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT511-650
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT512-120
 This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT512-1200
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT512-320
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT512-650
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
- SMT513-100
- 100mmm Long MMCX to MMCX cable. For more information about this or any of Sundance's products, please contact us using this form
more...
- SMT513-1200
- 1200mmm Long MMCX to MMCX cable. For more information about this or any of Sundance's products, please contact us using this form
more...
- SMT513-350
- 350mmm Long MMCX to MMCX cable. For more information about this or any of Sundance's products, please contact us using this form
more...
- SMT514-100
 100mm Long MMBX to MMCX cable for cross module communication. For more information about this or any of Sundance's products, please contact us using this form
more...
- SMT514-1200
- 1200mmm Long MMBX to MMCX cable for cross module communication. For more information about this or any of Sundance's products, please contact us using this form
more...
- SMT514-200
- 200mm Long MMBX to MMCX cable for cross module communication. For more information about this or any of Sundance's products, please contact us using this form
more...
- SMT514-350
- 350mm Long MMBX to MMCX cable for cross module communication. For more information about this or any of Sundance's products, please contact us using this form
more...
- SMT515
 The SMT515 will connect two Modules, like SMT335, with a connections between the Sundance Digital Bus connectors and will eliminate the need for a SMT510-SDB1 cable
more...
- SMT516
 The SMT516 will connect two Modules, like SMT374, with connections between the Sundance High-Speed Bus connectors and will eliminate the need for a SMT511-SHB10 cable.
more...
- SMT517
 The SMT517 will split the Sundance High-Speed Bus connector into two (2) Sundance Digital Bus connectors to facilitate interfacing a Module like SMT376 to be connected to SMT380 or similar. Left-hand versionAlso avail
more...
- SMT518
 The SMT518 will split the Sundance High-Speed Bus connector into two (2) Sundance Digital Bus connectors to facilitate interfacing a Module like SMT376 to be connected to SMT380 or similar. Right-hand versionAlso avai
more...
- SMT5180
 Power cable for SMT180Uses an 8-pin Molex Mini-Fit Jr. connector
more...
- SMT519I
 Custom cable for the SMT319 (Input)Svideo -> SMBStandard Length: 2m
more...
- SMT519O
 Custom cable for the SMT319 (Output)Svideo -> 2x SMBStandard Length: 2m
more...
- SMT520-04
 Four (4) Internal MMBX to DB37 socket connector mounted on a
more...
- SMT520-06
- Six (6) Internal MMBX to DB37 socket connector mounted on a
more...
- SMT520-08
- Eight (8) Internal MMBX to DB37 socket connector mounted on a
more...
- SMT520-09
- Nine (9) Internal MMBX to DB37 socket connector mounted on a
more...
- SMT520-18
- Eighteen (18) Internal MMBX to DB37 socket connector mounted on a
more...
- SMT521-2000
 This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length to ma
more...
- SMT522-RSL10
 Rocket Serial Link Cable (Long)
Click here for a link to the Samtec page describing this cable
more...
- SMT522-RSL5
 Rocket Serial Link Cable (Medium)
Click here for a link to the Samtec page describing this cable.This cable
more...
- SMT523
 A single RSL lane converted to MMBX connectors
more...
- SMT526-RSL-IC1
 RSL (Rocket Serial Link PCB) Inter module connection. For use between two RSL compatible modules. (Nearest edges)
more...
- SMT526-RSL-IC1-AC
 AC Coupled RSL (Rocket Serial Link PCB) Inter module connection. For use between two RSL compatible modules. (Nearest edges)
For use with Virtex 4 boards.
For more information, please
more...
- SMT528-XDS
 Cable for connecting the SMT410 to an XDS JTAG module.
more...
- SMT530-04
- DB37 plug to four (4) BNC connectors. 650mm LongThe mating half of this cable is the SMT520-04.
more...
- SMT530-06
- DB37 plug to six (6) BNC connectors. 650mm LongThe mating half of this cable is the SMT520-06.
more...
- SMT530-08
- DB37 plug to eight (8) BNC connectors. 650mm LongThe mating half of this cable is the SMT520-08.
more...
- SMT530-09
- DB37 plug to nine (9) BNC connectors. 650mm LongThe mating half of this cable is the SMT520-09.
more...
- SMT530-18
- DB37 plug to eighteen (18) BNC connectors. 650mm LongThe mating half of this cable is the SMT520-18.
more...
- SMT531-320
- This cable assembly is designed and manufactured by Precision Interconnect and can be order directly from the manufacture in any length, but Sundance do
more...
Cable Module SpecificCableCable Module SpecificCable- SMT539
 The SMT539 is an I/O cable for the SMT339.
It includes two inputs (for CVBS cameras) and one CVBS monitor output.
It also has a mixed mode VGA cable attached, enabling
more...
- SMT548-ATX
 A power cable converter between a SMT148FX-ATX and a Lambda NV1-453TTH-N3-I.
This cable is designed for use ONLY between these two devices.
more...
Cable - Series- SMT550 series
 An update to the SMT520 cable solution, the SMT550 enables full shielded coaxial connections from inside the PC to an external source.
The SMT550 is available with up to nine
more...
Cable- SMT550-4-MMBX
 An update to the SMT520 cable solution, the SMT550 enables full shielded coaxial connections from inside the PC to an external source.
This SMT550 has four (4) connections, with MMBX connections to the external SMA,
more...
- SMT550-4-MMCX
 An update to the SMT520 cable solution, the SMT550 enables full shielded coaxial connections from inside the PC to an external source.
This SMT550 has four (4) connections, with MMCX connections to the external SMA,
more...
- SMT550-9-MMBX
- An update to the SMT520 cable solution, the SMT550 enables full shielded coaxial connections from inside the PC to an external source.
This SMT550 has nine (9) connections, with MMBX connections to the external SMA,
more...
- SMT550-9-MMCX
- An update to the SMT520 cable solution, the SMT550 enables full shielded coaxial connections from inside the PC to an external source.
This SMT550 has nine (9) connections, with MMCX connections to the external SMA,
more...
- SMT551
- 1 meter long SMA BNC cable. Can be used with the SMT550 series.
more...
- SMT551E
 The SMT551E is a small PC rear panel mounted card containing two eSATA connectors and two fibre modules (type: Stratos RJS_ST31).
Each of the 4 serial interfaces is connected to a Sundance RSL connector. This conne
more...
- SMT560
 Bulkhead SHB connector/cable 19" long. Used to connect a module inside a PC case (for example) to the outside world.For more information on this or any Sundance product, please use thi
more...
- SMT562E
 Cable to connect the SMT362 to a network at speeds of up to 1GB/s. The cable also has 2 LEDS connected to a 2mm header for user implementation, and 2 SMA connectors for data I/O
more...
- SMT568
 This cable, when coupled with a Xilinx IV download cable and the rel
more...
- SMT570
 The SMT570 is an SLB test module. It is used to check the connections from your SLB motherboard (for for example SMT339, SMT368 and
more...
- SMT580
 With the SMT580 you can plug your PXIE card into a standard PCIe slot on your PC.
This enables easier and faster debugging of software, letting you develop your new design on your already configured PC.
It c
more...
- SMT587-SATA
 The SMT6387-SATA is an Adaptec Serial ATA cable, 7pin to 7pin, Straight Connector to Straight Connector, measuring 1 meter in length.
more...
- SMT587-SATA90
 The SMT6387-SATA90 is an Adaptec Serial ATA cable, 7pin to 7pin, Right Angled Connector to Straight Connector, measuring 1 meter in length.
more...
- SMT594
 The SMT594 is a splitter PCB that routes one signal coming on one MMCX connector to 4 MMCX connectors located on the other side. It plugs on the SMT384 and allows feeding one 50-O
more...
- SMT595
 The SMT595 is an MMCX to MMCX PCB connection. It is used to provide a loop back for signals. It is used for the SMT350 / SMT8096 system
more...
- SMT596
 Dual SHB to SHB mezzanineFor a single SHB SHB PCB, please see SMT516.For more information about this, or any of our products please use t
more...
- SMT596-H
 Dual SHB to SHB mezzanineFor a single SHB SHB PCB, please see SMT516.
This is the extended height version. It is of use where the standard version will not fit, for
more...
- SMT597
 This TIM mezzanine board provides an SHB to SHB link which can be used to join two adjacent TIMs' SHB connectors together. It then provides Agilent compatible 40-way logic analyser probe points. These headers are for dir
more...
- SMT598
 Intermodule probe connector.
For more information and pin outs, please see this document
[smt598_pinout.pdf]
more...
- SMT599
 The SMT599 is a debug tool to enable probing signals in the chain of a SHB cable.
more...
Software- SMT6001
 The SMT6001, or Sundance Flash Programming Utility, SFPU, allows you to manipulate the contents of the Flash ROM and perform the following operations:Install or update the bootloader;
Install or update t
more...
- SMT6002
 The SMT6002, or Sundance Flash Programming Utility for FPGA-only module, allows you to manipulate the contents of the Flash ROM and perform the following operations:
Install or update the standard FPGA firmwa
more...
- SMT6012
 The SMT6012 package installs the drivers for Sundance hardware to operate with TI Code composer.
This allows JTAG debugging of Sundance TIMS both on and off board.
Included in the package is an help file.
more...
- SMT6025
 The SMT6025 is an efficient, ready to use, host side interface to Sundance hardware. It allows you to control Sundance carrier boards from the host as well as to exchange
more...
- SMT6025-C4x
 SMT6025-C4x CodeComposer Driver
Most JTAG emulators allow the user to work with a single processor only. With SMT6025-C4x the user will have the flexibility to load and debug multiple C4x DSPs.
Ben
more...
- SMT6026
 The SMT6026 is an efficient, ready to use, host side interface to Sundance FPGA-only module. It allows you to control the FPGA-only modules from the host as well as to exchange data between the host and the module on the
more...
- SMT6035
 The SMT6035 is an efficient, ready to use, LINUX host side interface to Sundance hardware. It allows you to control Sundance carrier boards from the host as well as to exchange data between the host and TIMs on these car
more...
- SMT6036
 The SMT6036 is an efficient, ready to use, LINUX host side interface to Sundance hardware. It allows you to control Sundance carrier boards from the host as well as to exchange data between the host and TIM's on these ca
more...
- SMT6039
 FOR FULL INFORMATION PLEASE DOWNLOAD THISPRODUCT PRESENTATION
SMT6039
more...
- SMT6040
 SMT6040 is an easy-to-use, flexible and powerful tool to co-design and generate both optimized C code for DSP and VHDL code for FPGA from plain Simulink® diagrams. It is fully compatible with
more...
- SMT6041
FOR FULL INFORMATION PLEASE DOWNLOAD THIS PRODUCT PRESENTATION
Simulink® from T
more...
- SMT6048
 The SMT6048 is a software package that enables interaction between Sundance USB compatible hardware (such as the SMT148-FX and SMT144)
more...
- SMT6050
 SMT6050 is the Matlab® and Simulink® toolbox for all of Sundance's hardware. It provides
more...
- SMT6058
 It is possible to reach long distances and achieve gigabit data transfers with the Sundance optical transceiver modules, but have you ever needed to control your real-time system remotely? The SMT6058 Ethernet Board Supp
more...
- SMT6060-FTP
- The SMT6060 is a utility that allows and easy and cost-effective integration of the Net+50 ARM chip and the DSP that can be found on SMT363. It is
more...
- SMT6060-TCPIP
 SMT6060-TCPIP is a software package that provides Ethernet connectivity via the industry standard Berkeley sockets interface to a 3L/Diamond network of DSP processors. The package is typically used when there is at leas
more...
- SMT6065
- VxWorks Host-side software interface to Sundance hardware
VxWorks is increasingly becoming the most popular development suite for Real time embedded applications
The SMT6065 is one such prod
more...
- SMT6087-DL
 The SMT6087 is a utility that allows an easy and cost-effective integration of the Silicon Image S3512 chip and the '
more...
- SMT6087-FS
- The SMT6087-FS is a software package that allows 3L Diamond applications running on an SMT387 module have access to files on attached SATA disk drives. The package uses the industry standard FAT32 file system so that da
more...
- SMT6300
 Every Sundance carrier board is shipped with an SMT6300, which will install the necessary PCI device drivers for the SMT300, SMT300Q, SMT310, SMT310Q and also the now obsolete SMT320/SMT327. The SMT6300 will also install
more...
- SMT6400
 The SMT6400 supports all the DSP type TIMs.
This software package include:
Documentation for all the DSP type modules.
Documentation describing the Sundance firmware.
Sample code sho
more...
- SMT6500
 Sundance FPGA-only type Modules are supported by the SMT6500.
This software package include:
Documentation.
Library of hardware cores for Sundance communication interfaces.
A l
more...
- SMT6600
 The DAQ Modules are supported by the SMT6600.
This package includes:
Documentation for all the ADC/DAC boards.
Test software that illustrates the key features of the hardware.
The
more...
3U PXI express board - SLB Carrier- SMT700
 The SMT700 is a Virtex 5 based PXIe board.
The SMT700 module uses a Xilinx Virtex 5 LXT or SXT to implement the interface
more...
System- SMT7001
 Four C6201 200MHz DSPs 16MB SDRAM & 512KB SBSRAM of private memory for each DSP Up to 800Mbytes/s I/O bandwidth per DSP Optional shared memory interface for each DSP Optional 'C4x ComPort Interface Wi
more...
Software- SMT7002
 The SMT7002 is a software package from Sundance Multiprocessor Technology Ltd.
It contains applications that demonstrate the capabilities of the SMT702, and the
more...
System- SMT7003
 Four C6201 200MHz DSPs 16MB SDRAM & 512KB SBSRAM of private memory for each DSP Up to 800Mbytes/s I/O bandwidth per DSP Optional shared memory interface for each DSP Optional 'C4x ComPort Interfac
more...
- SMT7004
 Four C6701 167MHz DSPs 16MB SDRAM & 512KB SBSRAM of private memory for each DSP Over 800Mbytes/s I/O bandwidth per DSP using Sundance Digital Bus and Datapipe Links Optional shared memory interface for
more...
- SMT7005
 Four C6201 200MHz DSPs 16MB SDRAM & 512KB SBSRAM of private memory for each DSP Up to 800Mbytes/s I/O bandwidth per DSP Optional shared memory interface for each DSP Optional 'C4x ComPort Interface Windows
more...
- SMT7006
 Four C6701 167MHz DSPs 16MB SDRAM & 512KB SBSRAM of private memory for each DSP Over 800Mbytes/s I/O bandwidth per DSP using Sundance Digital Bus and Datapipe Links Optional shared memory interface for
more...
Solution - PCI- SMT7007
 The redesigned SMT7007 is the first of the Sundance SMT7xxx Development Systems that uses the TMS320C6455 DSPs from Texas Instruments.
Fou
more...
- SMT7007
- The SMT7007 is the first of the Sundance SMT7xxx Development Systems that uses the TMS320C6416 DSP from Texas Instruments and four of the
more...
Solution - cPCI- SMT7008
 The redesigned SMT7008 is the first of the Sundance SMT7xxx Development Systems that uses the TMS320C6455 DSPs from Texas Instruments.
Fou
more...
Solution - PCI- SMT7008
- "Rusutsu" cPCI C6416 multi DSP SystemSMT300Q with four SMT361s.
more...
3U PXI express board- SMT701
 The SMT701 combines the power of the SMT901 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT901 WITHOUT a
more...
3U PXI express board - ADC- SMT702
 The SMT702 is a PXI Express (opt. Hybrid) Peripheral Module (3U), which integrates two fast 8-bit ADCs, a clock circuitry, 2 banks of 1GByte DDR2 Memory each and a
more...
Software- SMT7026
- The SMT7026 is an efficient, ready to use, host side interface for the SMT702 and SMT712. It allows you to control the SMT702 and SMT712 from the host as well as to exchange data between the host.
For more informa
more...
3U PXI express board- SMT703
 The SMT703 is built around a user programmable FPGA architecture that features the latest Xilinx Virtex 5 FPGAs. It is supported with two WiMAX RF transceivers that in turn are supported with a mixed signal front-end th
more...
- SMT709
 The SMT709 combines the power of the SMT909 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT909 WITHOUT a
more...
Solution - PCI- SMT7098
 For more details about this product please use this form to contact Sundance.
more...
3U PXI express board - DAC- SMT712
 The SMT712 is a PXI Express (opt. Hybrid) Peripheral Module (3U), which integrates two fast 12-bit DACs, 2 banks of 1GByte DDR2 memory each, a clock circuitry and a Virte
more...
3U PXI express board- SMT722
- The SMT722 combines the power of the SMT922 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT922 WITHOUT a
more...
Carrier and TIM- SMT738-VP7
 The SMT738-VP7 is made up of the SMT300 (cPCI 3U Carrier with 1 module site; PXI compatible; V3 PCI Chip-set; SDB and 1Mbyte of shared memory on Master site) and a SMT338-VP7 (A FPGA Module; SHB/RSL/SLB Interfaces; Xilin
more...
3U PXI express board- SMT739
 The SMT739 combines the power of the SMT939 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT939 WITHOUT a
more...
- SMT741
 The SMT741 combines the power of the SMT941 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT941 WITHOUT a
more...
- SMT742
- The SMT742 combines the power of the SMT942 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT942 WITHOUT a
more...
- SMT743
 The SMT743 combines the power of the SMT943 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT943 WITHOUT a
more...
- SMT744
- The SMT744 combines the power of the SMT944 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT944 WITHOUT a
more...
- SMT746
- The SMT746 combines the power of the SMT946 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT946 WITHOUT a
more...
- SMT749
 The SMT749 combines the power of the SMT949 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT949 WITHOUT a
more...
- SMT750
 The SMT750 combines the power of the SMT950 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT950 WITHOUT a
more...
Solution - PXI- SMT751
- The SMT751 is made up of the SMT300 (cPCI 3U Carrier with 1 module site; PXI compatible; V3 PCI Chip-set; SDB and 1Mbyte of shared memory on Master site) and a SMT351(A Memory Module; Virtex-II Pro FPGA XC2VP7;)
more...
Carrier and TIM- SMT751-G
- The SMT751-G is made up of the SMT300 (cPCI 3U Carrier with 1 module site; PXI compatible; V3 PCI Chip-set; SDB and 1Mbyte of shared memory on Master site) and a SMT351-G (A Memory Module; Virtex-II Pro FPGA XC2VP7; Rock
more...
3U PXI express board- SMT759
- The SMT759 combines the power of the SMT959 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT959 WITHOUT a
more...
Solution - PXI- SMT761Q
 The SMT761Q is made up of the SMT300 (cPCI 3U Carrier with 1 module site; PXI compatible; V3 PCI Chip-set; SDB and 1Mbyte of shared memory on Master site) and a SMT361Q (A 4x C6416 @ 600MHz, 1x Virtex II XC2V2000, 2x SHB
more...
3U PXI express board- SMT780
- The SMT739 combines the power of the SMT980 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT980 WITHOUT a
more...
- SMT781
 The SMT781 combines the power of the SMT381 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT381 WITHOUT a
more...
- SMT784
 The SMT784 combines the power of the SMT384 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT384 WITHOUT a
more...
Solution - PXI- SMT787
 The SMT787 is made up of the SMT300 (cPCI 3U Carrier with 1 module site; PXI compatible; V3 PCI Chip-set; SDB and 1Mbyte of shared memory on Master site) and an SMT387 (Disk Storage Module; 'C6415 DSP; Virtex II VP20; SA
more...
3U PXI express board- SMT790
- The SMT739 combines the power of the SMT390 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT390 WITHOUT a
more...
Solution - PXI- SMT790-VP7-5
 The SMT790-VP7-5 is made up of the SMT300 (cPCI 3U Carrier with 1 module site; PXI compatible; V3 PCI Chip-set; SDB and 1Mbyte of shared memory on Master site) and a SMT390-VP7-5 (An ADC Module, 2-Channels 210MSPS @ 12bi
more...
3U PXI express board- SMT791
 The SMT791 combines the power of the SMT391 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT391 WITHOUT a
more...
Solution - PXI- SMT795
 The SMT795 is made up of the SMT300 (cPCI 3U Carrier with 1 module site; PXI compatible; V3 PCI Chip-set; SDB and 1Mbyte of shared memory on Master site) and a 1GHZ SMT395 (A single width TIM with a Virtex II pro FPGA an
more...
3U PXI express board- SMT799
- The SMT739 combines the power of the SMT399-160 with the PXIe compliant SMT700 carrier card.
This enables the use of an SMT399-1
more...
Solution - Embedded- SMT8005
 The SMT8005 multichannel data acquisition platform supports the design and development of a wide range of real time data acquisition applications.
The SMT8005 can be used for Radar Systems, High-speed Data Acquisitio
more...
System- SMT8009
 The system is designed to make a data acquisition onto a SCSI disk of data coming from two independent Analogue to Digital Converter channels.The Analogue to Digital Converter is a SMT340 a dual channel 40MHz, 12-Bit
more...
- SMT8013
 The system samples an analogue channel at 1MHz with a 16-bit sample format. The acquired data is processed in real time by a high performance Digital Signal Processor (DSP), which runs a Fast Fourier Transform (FFT) on t
more...
- SMT8016
 The SMT8016 system has been put together to implement a high-speed dual channel Frame grabber. The digital data input into the SMT8016 is received by the SMT338 Frame Grabber and passed onto the SMT372 DSP module. Th
more...
System - SMT8025
 The SMT8025 is a versatile integrated DSP based Data Acquisition
System with a DC-12V Battery input. The software can be downloaded to the Flash memory from a remote location via the RS232 interfaces.The ADC/DAC sig
more...
System- SMT8026
 SMT8026 is a test and verification system for the SMT378 (DAC) and SMT380 (ADC).This system will be used as an acceptance test procedure (ATP) system for internal Sundance and Parsec use. It could also be used as
more...
- SMT8027
 This system is comprised of the following:
SMT118. 3 site Stand alone TIM carrier board.
more...
- SMT8028
 The SMT8028 is an Analogue input, TIM based ADC system with up to 32 channel. Each channel supports Analogue to Digital conversion with the sample rates up to 1.2 MHz and 16 bits precision. The actual ADCs are based
more...
- SMT8030
 SMT8030 is a Analogue/Digital system. The core of this system is a C6701 processor from Texas Instruments. It is to generate s
more...
Solution - PCI- SMT8036
 The SMT8036 is a complete development platform including a demonstration software package, hosted on an SMT310Q PCI Carrier in a PC, for the evaluation of
more...
- SMT8036E
 The SMT8036E is a complete development platform including a demonstration software package, hosted on an SMT310Q PCI Carrier in a PC,
more...
- SMT8037
 The SMT8037 is a demonstration software for the evaluation of the SMT365 and SMT364 modules. It can be used for prototyping 3G (3rd ge
more...
- SMT8039
 The SMT8039 is comprised of an SMT339, SMT539 and a SMT310.
The SMT8039 system include
more...
- SMT8041
 The SMT8041 is a demonstration software package, hosted on a SMT310Q PCI Carrier in a PC, for the evaluation of SMT365,
more...
Solution - Embedded- SMT8042
 The SMT8042 is a High End Embedded Software Radio development system comprising a stand alone carrier card (SMT118), a dual channel 1GHz ADC module (
more...
Solution - PCI- SMT8043
- The SMT8043 is a High End Software Radio development system hosted in a PC and comprising a PCI carrier card(SMT310Q), a dual channel 1GHz ADC module (
more...
- SMT8044
- The SMT8044 is an enhancement on the SMT8043. It adds an SMT338VP into the mix enabling pre-processing on the fly and bandwidth reduction inside the FPGA allowing the user not t
more...
- SMT8046
 The SMT8046 is a demonstration software package, hosted on a SMT310Q PCI Carrier in a PC, for the evaluation of SMT374 and
more...
- SMT8047
 The SMT8047 is a demonstration software for the evaluation of the SMT374 and SMT364 modules. It can be used for prototyping 3G (3rd genera
more...
- SMT8056
 The SMT8056 is a Multi-channel ADC/DSP system for applications up to 10MHz. The basic system is based on 8 ADC channels and a DSP for processing. The system can easily upgraded with more channels and more DSP processors.
more...
- SMT8081
 The SMT8081 is a complete development platform including a demonstration software package, comprising of a SMT310Q PCI Carrier, a 1GHz DSP
more...
- SMT8090_365
 The SMT8090 is a demonstration software for the evaluation of the SMT365 and SMT390 modules. It can be used for prototyping 3G (3rd generati
more...
- SMT8090_374
 The SMT8090 is a demonstration software for the evaluation of the SMT374-6713-4 and SMT390-VP30-6 modules. It can be used for
more...
- SMT8090_395
 The SMT8090 is a demonstration software for the evaluation of the SMT395-VP30-6 and SMT390-VP30-6 modules. It can be used for
more...
- SMT8091
 The SMT8091 is a high performance software defined DAQ system hosted in a PC.
It comprises of PC carrier board (SMT310Q), a dual 8-bit ADC
more...
System- SMT8094-R
 The SMT8094-R comprises of a SMT310Q, a SMT395 two SMT351s, a
more...
- SMT8094-T
- The SMT8094-T comprises of a SMT310Q, a SMT395 and two SMT368s, both playing host to a
more...
Solution - PCI- SMT8096
 The SMT8096 is a upgrade for the SMT8036 replacing the 600MHz DSP for a 1GHz version and upgrading both the FPGA and ADC/DACs on the DAQ module.
SMT8096 development platform supports the design and development of a
more...
- SMT8101
 The SMT8101 is PCI based and stands as a development platform for Multi-carrier / Multi-standard cellular systems, High Direct-IF infrastructures, Test Equipment, etc. This system is built around 4 main boards: C64xx-bas
more...
System- SMT8121
 The SMT8121 development platform is a modular system made of multiple FPGAs and a single DSP that can be used for multi-carrier/multi-standard cellular systems, High Direct-IF infrastructures, radar systems and test equi
more...
System - Embedded- SMT8146
 The SMT8146 development platform supports the design and development of a wide range of radio and waveform applications.
The SMT8146 can be used for SDR Research, Military & Public Safety telecom prototypes, 3rd & 4t
more...
Solution - Embedded- SMT8180
 The SMT8180 has been designed to take one or two SMT180 Carrier boards.
These SMT180s can be populated with any type of Sundance Modules to enable a 'Custom' Embedded DSP solut
more...
System - Embedded- SMT8246
 The SMT8246 development platform supports the design and development of a wide range of radio and waveform applications.
more...
Engineering Kit- SMT900
 The SMT900 is the first specific EDK (Engineering Development Kit) that Sundance has released.
It is comprised of an SMT111 TIM motherboard, coupled with an
more...
SLB Module - Dual RF MIMO transceiver- SMT901
 The SMT901 is an advanced, high-quality MIMO transceiver card, designed to cover all features of future high-speed MIMO TDD radio systems. The SMT901 comprises two complete, fully configurable transceiver chains between
more...
SLB Module - Dual WiMAX RF Module- SMT903
 The SMT903 is a single width TIM that plugs onto an SLB base module such as the SMT368 (Virtex-4 FPGA) or the SMT351T (Virtex-5 LXT/SXT FPGA) or other SLB base module. It incorporates 2 Maxim Wimax Transceivers that oper
more...
SLB module - Video Decoder- SMT909
 The SMT909 is a Dual video decoder, SLB expansion card. The SMT909 utilises two NXP SAA7118 video decoder, which supports a wide variety of a
more...
System - Embedded- SMT9091
 The SMT9091 can be used for Broadband cable modem head-end systems, Wireless infrastructure applications, 3G/4G Radio transceivers, Software Defined Radio systems, Medical imaging systems, Spectrum analysers, High-speed
more...
SLB Module - Dual RF MIMO transceiver- SMT911
 The SMT911 is an advanced, high-quality MIMO transceiver card, designed to cover
all features of future high-speed MIMO radio systems. The SMT911 comprises two
complete, fully configurable transceiver chains between tw
more...
SLB Module - ADC- SMT916
 The SMT916 is an SLB mezzanine board that incorporates twelve AD7626 ADC chips
from Analog Devices (Two groups of six ADCs, Group A for the first six channels
and Group B for the next six channels). Converters are 16-b
more...
SLB Module - RS422 Camera Link- SMT922
 The SMT922 is an SLB (Sundance Local Bus) with a RS-422 interface primarily designed as a camera link interface (a 16-bit CEDIP camera).
For more information about this or any Sundance product please
more...
SLB module- DVI Interface- SMT939
 The SMT939 is a DVI transceiver module SLB expansion card. It is capable of receiving a Single DVI channel running with a maximum clock frequency of 165MHz. The decoded DVI data stream is organised as a 24bit RGB packet
more...
SLB Module - ADC- SMT941
 The SMT941 is a single width expansion TIM that plugs onto an SLB base module, the SMT351T (Virtex-5 LXT or SXT FPGA) as an exa
more...
SLB Module - DAC- SMT942
 The SMT942 is a single width expansion TIM that plugs onto an SLB base module, the SMT351T (Virtex-5 LXT or SXT FPGA) as an example and
more...
SLB Module - DAC & ADC- SMT943
 The SMT943 is a single width expansion TIM that plugs onto an SLB base module, the SMT351T (Virtex-5 LXT or SXT FPGA) as an exa
more...
SLB Module - Quad medium speed DAQ- SMT944
 The SMT944 is a single width expansion SLB mezzanine that plugs onto base TIM that incorporates an SLB (eg SMT368).
It uses a Texas Instruments Analog-to-Digital Converter (
more...
SLB Module - Quad 1Gb/s Ethernet adaptor- SMT945
 The SMT945 is a single width expansion SLB mezzanine that plugs onto base TIM that incorporate the SLB (eg SMT339).
It uses 2 Marvell Alaska gigabit PHYs (
more...
SLB Module - DAC & ADC- SMT946
 The SMT946 (16 bit) is a single width expansion SLB mezzanine that plugs onto a base TIM that incorporates the SLB (eg SMT368, SMT111).
more...
SLB Module - Dual camera link- SMT949
 The SMT949 is a Camera Link interface, SLB expansion card. Its can be attached to a number of TIM modules to allow interfacing of Camera Link devices.
The SMT949 provides a Base, Medium and Full configuration Camera
more...
SLB Module - DAQ- SMT950
- The SMT950 is a single width expansion TIM that plugs onto the SLB and incorporates 2 Texas Instrument Analog-to-
more...
SLB Module - DAC & ADC- SMT959
 The SMT959 is an ADC - DAC module, SLB expansion card. The module combines four analogue-to-digital channels capable of converting analogue inputs into 12Bit digital words up to 40 Mega samples per second (Msps) and
more...
SLB Module - Octal ADC Module- SMT980
 The SMT980 is a octal ADC mezzanine module. It uses two ADS6445 quad ADCs from Texas Instruments. These devices output data on 2-bit LVDS buses. These are typically connected directly to an FPGA. All inputs are terminate
more...
SLB extender- SMTe
- If you need to add a little height to allow air flow bettwen your TIM and your
SLB module, use the SMTe (SLB Extender). It can be used with the SMTFan1.
For a picture of
more...
Cooling module- SMTFan1
 The SMTFAN1 is a TIM sized module that houses a two speed blower.
It is designed for use on an SMT310Q and will allo
more...
Computer- SMTPC1 Series
- Sundance specifies and builds quality custom PCs to best suit its own hardware.
All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware p
more...
- SMTPC1-Basic
 All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware purchased, and are accompanied by a CD-image set which can recover the hard disk c
more...
- SMTPC1-Pro
 All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware purchased, and are accompanied by a CD-image set which can recover the hard disk c
more...
- SMTPC1-Ultra
- All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware purchased, and are accompanied by a CD-image set which can recover the hard disk c
more...
- SMTPC2 Series
 All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware purchased, and are accompanied by a CD-image set which can recover the hard disk c
more...
- SMTPC3 Series
 All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware purchased, and are accompanied by a CD-image set which can recover the hard disk c
more...
- SMTPC4 Series
 Sundance specifies and builds quality custom PCs to best suit its own hardware.
All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware p
more...
- SMTPC4-TwinXeon
- All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware purchased, and are accompanied by a CD-image set which can recover the hard disk c
more...
- SMTPCs
- Sundance specifies and builds quality custom PCs to best suit its own hardware.
All Sundance PCs ordered with our hardware are delivered pre-configured for the hardware p
more...
Software- TMDSCCSALL-1
- LIMITED TIME PRICE
Normal Price $3595
Code Composer Studioâ„¢ (CCStudio) Integrated Development Environment (IDE) is a key element of the eXpressDSP Software and Development Tools strategy from
more...
System - Embedded- VisionMax
 VisionMax is an advanced system that allows the development of real-time video applications.
VisionMax allows the use of codec / compression IP Cores from leading suppliers. Being "3L Di
more...
- WiMAX
 The WiMAX platform supports the design and development of a wide range of WiMAX applications.
The WiMAX Kit can be used for SDR research, WiMAX basestation prototyping, WiMAX test communications, Military & public
more...
Software- Wizard
 This wizard configures Sundance hardware and Software.Please click here to download the latest version.
There is now a Windows 64 bit version of
more...
|
