Sundance Documentation Page

Documentation:

Type	Description	Date Pubished
Application note Back to the top
	The 2-GHz platform is a system that is composed of one SMT702v2 (PXI Express � FX70T or LX110T FPGA) and an SMT712v2 (PXI Express � FX70T or LX110T FPGA).	6/18/2010
	The SMT702v2 is PXI Express module that integrates two fast 8-bit ADC (3GSPS), a clock circuitry, 2 banks of DDR2 memory (1Gbytes each), a 4-lane PXI Express core and two SHB connectors (32-bit bus, Double-Data Rate).	6/18/2010
	This document describes the SMT911 demo package that comes with the MIMO board.	1/29/2010
	This document describes the SMT903 demo package that comes with the WiMAX board.	12/17/2009
	Ethernet support for the SMT148-FX standalone carrier board	7/31/2009
	Rebuilding the firmware with Diamond	7/1/2008
	CODESIGN, IMPLEMENTATION AND VALIDATION OF THE XILINX FPGA�S EMBEDDED DEVICES FOR SIGNAL PROCESSING SOLUTIONS	9/25/2007
	SMT6041 Application note	7/20/2007
	HW/SW Codesign of Digital Signal Processing Systems is as easy as �	1/25/2007
	SMT384 AC Performance information	1/19/2007
	SMT350 Performance information	9/8/2006
	SMT381 Performance information	7/14/2006
	Measurements reported in this document have been performed using an SMT8036 system for capturing data. Two options are available on the SMT370v2 when it comes to the ADC input coupling: AC or DC	7/27/2005
	Application note about SMT374 power consumption and power down modes	2/3/2005
	Pin outs of the SHB side of the connector.	2/26/2004
	The SMT377 is populated with a Xilinx FPGA (XC2V1000-6FG456) and a CPLD (XC9536XL-CS48). Both devices are in the same JTAG chain, which means that they can be reprogrammed independently using the on-board JTAG connector. This application note describes how to do it.	11/8/2003
	The SMT364 is populated with a Xilinx FPGA (XC2V1000-4FG456) and a PROM (XC18V04). Both devices are in the same JTAG chain, which means that they can be reprogrammed independently. This application note describes how to do it.	9/1/2003
	The SMT370 is populated with a Xilinx FPGA (XC2V1000-6FG456) and a PROM (XC18V04). Both devices are in the same JTAG chain, which means that they can be reprogrammed independently. This application note describes how to do it.	7/3/2003

Documentation:

Application note