Xilinx Kria K26 SoM now available in our store

Available now in our store and ready to ship we have a number of Kria K26 System-on-Modules. The newest path to whole application acceleration, the K26 SoM is optimized for edge vision applications requiring flexibility to adapt to changing requirements.

Designed to Enable Smart City and Smart Factory Applications

  • 3X vision AI performance and 2X performance-per-watt versus competing SOMs1
  • Native ROS 2 support for 5X productivity for robotics and industrial automation

Out-of-the-Box Hardware Acceleration

  • Leverage pre-built accelerated applications without needing FPGA place-and-route
  • Tailor AI models and application code to your requirements

Production Qualified and Certified Commercial and Industrial Grades

  • Commercial: operating range 0 to 85°C for smart camera, embedded vision, tracking & identification
  • Industrial: operation range -40-100°C and ruggedized for extreme environments

 

Part Number: SM-K26-XCL2GC

The K26 SOM features an exclusive, custom-built XCK26 SoC based on the Zynq® UltraScale+™ MPSoC architecture, that has been configured for enhanced acceleration of vision AI applications.

Specifications

 

Area Parameter K26
Form Factor Dimensions (with heat spreader) 77mm x 60mm x 11mm
Processor Unit & Acceleration Application Processor Quad-core Arm® Cortex®-A53 MPCore™ up to 1.5GHz
Real-Time Processor Dual-core Arm Cortex-R5F MPCore up to 600MHz
Graphics Processing Unit Mali™-400 MP2 up to 667MHz
Video Codec Unit (VCU) 1 – up to 32 streams (total resolution ≤ 4Kp60)
Trusted Platform Module (TPM) Infineon 2.0
Memory On-Chip* 26.6Mb On-Chip SRAM
On-SOM 4GB 64-bit DDR4 (non-ECC) and 16GB eMMC
Connectivity High-Speed PS Connectivity (GTR) PCIe® Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet
General PS Connectivity (MIO) 2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO
Transceivers GTH 12.5Gb/s Transceivers 4 (PCIe Gen3 x4, SLVS-EC, HDMI 2.0, DisplayPort 1.4)
GTR 6Gb/s Transceivers 4
I/O Count PS MIO (1.8V) 49
PL High-density (HD) I/O (3.3V) 69
PL High-performance (HP) I/O (1.8V) 116
Programmable Logic System Logic Cells (K) 256
DSP Slices 1,248
Power & Thermal Typical Power 7.5W
Maximum Power** 15W
Thermal Interface Passive (Heat spreader)
Speed and Temp Grade Commercial -2 speed grade, low voltage and 0 to 85°C temperature range
Industrial -2 speed grade, low voltage and –40 to 100°C temperature range

Kria KV260 Basic Accessory Pack

We also have a some of the KV260 accessory packs available in the store.

Part Number: HW-BACCP01-SK-G

The KV260 Basic Accessory Pack contains all the essential accessories to get you up and running with the Kria™ KV260 Vision AI Starter Kit, enabling you to launch Xilinx’s smart camera accelerated application in less than 1 hour.

KV260 Power Supply & Adapter
AC/DC WALL MOUNT ADAPTER 12V 36W Plugs into the DC power supply jack on the Starter Kit. Comes with interchangeable blades for major regions (North America, Europe, UK, Australia, China

USB-A to micro-B Cable
Connects user end system (USB-A) to the micro-B connector on the starter kit to establish UART connection to setup the terminal

Ethernet Cable
Connects the user’s networking setup to the RJ-45 connector on the Starter Kit

HDMI Cable (Male to Male)
Connects the HDMI connector on the Starter Kit to an HDMI monitor/display

MicroSD card and MicroSD to SD Adapter
16GB MicroSD and adapter to flash the SD card image to boot or run applications

13MP Auto Focus RGB Camera Module
Part of the ON Semiconductor IAS family of modules. 1/3.2” CMOS Sensor (AR1335) Connects to the 2 IAS connectors of the Starter Kit

Contact us for more information