by Chris Hamblin | Jun 19, 2015 | Stand Alone, TIM Carrier
4 site stand alone TIM carrier – Single input voltage version There are two versions of the SMT148-FX available. The DC version, and the ATX version. The DC version uses a DC input and DC-DC converters to attain the required voltages, where as the ATX version...
by Chris Hamblin | Jun 19, 2015 | Stand Alone, TIM Carrier
4 site stand alone TIM carrier – ATX version There are two versions of the SMT148-FX available. The DC version, and the ATX version. The DC version uses a DC input and DC-DC converters to attain the required voltages, where as the ATX version uses a PC type...
by Chris Hamblin | Jun 19, 2015 | Stand Alone, TIM Carrier
Embedded Module Carrier The SMT144 is a reduced feature version of the SMT148-FX. The SMT144 is powered from a standard PC power supply, eliminating the need for complex power / cable solutions. Diamond 3L can be connected via the USB 2.0 port on the board, enabling...
by Chris Hamblin | Jun 19, 2015 | Stand Alone
NOT FOR NEW DESIGNS Fibre Board; Converts Sundance’s SDB/SHB into a 2Gbit / s Fibre Link The SMT123 is designed as a multi-purpose two-way Fibre-Channel interface. It is a stand-alone board with a Sundance High-Speed Bus interface, that provides two separate...
by Chris Hamblin | Jun 19, 2015 | Not for new designs, Stand Alone
NOT FOR NEW DESIGNS Stand Alone Module Carrier with 3 Module, 12Volt supply; Boxable The increasing need for portable and embedded DSP solutions has convinced Sundance of the need for a truly 12V-Input solution with stand-alone capability. The SMT118-LT has been...
by Chris Hamblin | Jun 19, 2015 | Not for new designs, Stand Alone
NOT FOR NEW DESIGNS Stand Alone Module Carrier with 3 Module sites and I/O facilities, 12Volt supply; Boxable The increasing need for portable and embedded DSP solutions has convinced Sundance of the need for a truly 12V-Input solution with stand-alone capability. The...
