Our range of software developed for use with Sundance hardware:
SMT6001
Sundance Flash Programming Utility (SFPU) - DSP Modules The SMT6001, or Sundance Flash Programming Utility,SFPU, allows you to manipulate the contents of the Flash ROM and perform the following operations: Install or update the bootloader; Install or update the FPGA data; Store, enable and disable a user application; Display information about the contents of the...
SMT6002
Sundance Flash Programming Utility for FPGA-only module The SMT6002, or Sundance Flash Programming Utility for FPGA-only module, allows you to manipulate the contents of the Flash ROM and perform the following operations: Install or update the standard FPGA firmware; Store other bitstreams or user data; Display information about the contents of the ROM. Requirements: Sundance:...
SMT6012
EPK Driver for Code Composer Studio The SMT6012 package installs the drivers for Sundance hardware to operate with TI Code composer. This allows JTAG debugging of Sundance TIMS both on and off board. Included in the package is an help file. If you are NOT buying Code Composer from Sundance, you will need to...
SMT6025
Host-side software interface to Sundance hardware The SMT6025 is an efficient, ready to use, host side interface to Sundance hardware. It allows you to control Sundance carrier boards from the host as well as to exchange data between the host and TIMs on these carrier boards. What the SMT6025 can do for you: Shorten development...
SMT6026
HOST side drivers for FPGA-only modules (Windows OS) The SMT6026 is an efficient, ready to use, host side interface to Sundance FPGA-only module. It allows you to control the FPGA-only modules from the host as well as to exchange data between the host and the module on the first site of the Sundance carrier board....
SMT6035
LINUX Host-side software interface to Sundance hardware The SMT6035 is an efficient, ready to use, LINUX host side interface to Sundance hardware. It allows you to control Sundance carrier boards from the host as well as to exchange data between the host and TIMs on these carrier boards. What the SMT6035 can do for you:...
SMT6036
HOST side drivers for FPGA-only modules (Linux OS) The SMT6036 is an efficient, ready to use, LINUX host side interface to Sundance hardware. It allows you to control Sundance carrier boards from the host as well as to exchange data between the host and TIM's on these carrier boards. SMT6036 is useful for systems using...
SMT6040
Sundance <> Simulink® Multi-DSP Multi-FPGA co-design and co-generation Toolbox SMT6040 is an easy-to-use, flexible and powerful tool to co-design and generate both optimized C code for DSP and VHDL code for FPGA from plain Simulink® diagrams. It isfully compatible with Simulink® libraries. SMT6040 is specifically designed for Sundance high-performance FPGA/DSP/DAQ boards. It supports rich functionality and can decrease...
SMT6041
Sundance <> Xilinx System Generator <> Simulink Toolbox for VHDL code generation and co-design Simulink® from The MathWorks® is a powerful graphical modelling system which allows complex systems to be designed using a block diagram methodology. Xilinx System Generator for DSP is a blockset for Simulink® which allows the modelling of fixed point systems which can be transformed into...
SMT6048
Host-side USB software interface to Sundance hardware The SMT6048 is a software package that enables interaction between Sundance USB compatible hardware (such as the SMT148-FX and SMT144) and a PC with a USB port. The simplest and most general I/O mechanism that this package can be used for is to communicate between the host and the Root DSP...
SMT6058
Ethernet support for the SMT148-FX standalone carrier board It is possible to reach long distances and achieve gigabit data transfers with the Sundance optical transceiver modules, but have you ever needed to control your real-time system remotely? The SMT6058 Ethernet Board Support Package (Ethernet BSP) is the solution to interface the SMT148-FX standalone carrier board to the...
SMT6060-FTP
Board Support Package for NET+Works and SMT363 DSP Modules The SMT6060 is a utility that allows and easy and cost-effective integration of the Net+50 ARM chip and the DSP that can be found on SMT363. It is ready to use and provide a TCI/IP interface to a host. What the SMT6060 can do for you: Shorten development...
SMT6060-TCPIP
Board Support Package for NET+Works and SMT363 DSP Modules SMT6060-TCPIP is a software package that provides Ethernet connectivity via the industry standard Berkeley sockets interface to a 3L/Diamond network of DSP processors. The package is typically used when there is at least one SMT363 present in the system; however, using a feature of the SMT6025...
SMT6065
VxWorks Host-side software interface to Sundance hardware VxWorks Host-side software interface to Sundance hardware VxWorks is increasingly becoming the most popular development suite for Real time embedded applications The SMT6065 is one such product developed on VxWorks aimed at providing VxWorks host-side interface to Sundance hardware. It allows you to load stand-alone applications developed on 3L/Diamond RTOS to the Sundance daughter modules (TIMs)...
SMT6300
Carrier Board Device Driver Package Every Sundance carrier board is shipped with an SMT6300, which will install the necessary PCI device drivers for the SMT300, SMT300Q, SMT310, SMT310Q and also the now obsolete SMT320/SMT327. The SMT6300 will also install the USB device driver for the SMT111, the SMT144, the SMT148_FX and the SMT700. It includes...
SMT6400
DSP Module Package The SMT6400 supports all the DSP type TIMs. This software package include: Documentation for all the DSP type modules. Documentation describing the Sundance firmware. Sample code showing how to use the TIM resources. The software will be supplied on a CD-ROM for "First-Time" customers when ordered as a free of charge item....
SMT6500
FPGA Module Package Sundance FPGA-only type Modules are supported by the SMT6500. This software package include: Documentation. Library of hardware cores for Sundance communication interfaces. A library of DSP software used to configure the FPGA bit-stream. A windows application for configuring the FPGA module on the first TIM site. The software will be supplied on...
SMT6600
DAQ Module Package The DAQ Modules are supported by the SMT6600. This package includes: Documentation for all the ADC/DAC boards. Test software that illustrates the key features of the hardware. The FPGA source files and bit-stream (optional). MATLAB® application. Typical application examples. The software will be supplied on a CD-ROM for "First-Time" customers when ordered as...
SMT7002
Software The SMT7002 is a software package from Sundance Multiprocessor Technology Ltd. It contains applications that demonstrate the capabilities of the SMT702, and the SMT712.
SMT7026
HOST side drivers for SMT702 and SMT712 The SMT7026 is an efficient, ready to use, host side interface for the SMT702 and SMT712. It allows you to control the SMT702 and SMT712 from the host as well as to exchange data between the host. For more information about this or any other Sundance product please use...
TMDSCCSALL-1
Code Composer Studio IDE - System Development Tools LIMITED TIME PRICE Normal Price $3595 Code Composer Studio™ (CCStudio) Integrated Development Environment (IDE) is a key element of the eXpressDSP Software and Development Tools strategy from Texas Instruments. CCStudio delivers all of the host tools and runtime software support for your TMS320 DSP and OMAP based real-time...
Wizard
Sundance Software Wizard This wizard configures Sundance hardware and Software. Please click here to download the latest version. There is now a Windows 64 bit version of the Wizard. Please click here to download it.